Certifications, test reports and declarations — all on the proof hub.
Silicate Systems
Contact
← All systems
Waterproofing

Eco All In One

For water-retaining structures. Waterproof to 1.5 bar at 7 days and 5 bar at 28 days, DVGW W270 and W347. 


Where it may be used

Indoor and outdoor, as stated on this system's own data sheet. Use elsewhere is not covered by that sheet.

Application temperature: +10 °C.

Thickness range: max. 4 mm.

Substrate must be sound and free of loose material, with a pull-off strength of at least 1.5 N/mm². The chemistry is consistent; what the floor becomes depends on the substrate, the specification and the applicator.


Declared for this system
EMICODE EC1PLUS — very low emission

VOC- and APEO-free is declared for Eco Sil, Eco Flex All In One and Eco Shield only, so it is not claimed here. BREEAM, DGNB and LEED contribution is documented per project, not per range.


Data sheet figures
Eco All In One. Figures from the published technical data sheet.
PropertyValueStandard
Waterproof1.5 bar at 7 days, 5 bar at 28 daysAchieved only at full 4 mm thickness, applied as two 2 mm layers
Negative pressure0.3 barDepending on substrate
Drinking water approvalDVGW W270 and W347RISE type-approval C900385
Exposure classXA2Sulfate resistance per DIN 4030
Compressive strengthapprox. 35 N/mm²—
Flexural strengthapprox. 7.5 N/mm²—
Emission classEMICODE EC1PLUSGEV
Total thicknessmax. 4 mm2 layers of 2 mm each
Consumptionapprox. 2 kg/m² per mm layer—
Mixing ratio4.25 L water / 25 kg powderSlurry consistency
Processing temperature+10 °C to +35 °C—
Processing timeapprox. 35 min at 20 °C—
Walkable1 dayAt 20 °C
Fully loadable7 daysAt 20 °C
Packaging25 kg paper bag—
Storage12 months, unopened10–25 °C, not below 0 °C

Projects using this system

Documents

/systems/eco-all-in-one