One mineral chemistry, different specs

For warehouses, garages and heavy-duty traffic. Walkable in four hours, fully loadable in four days. 

For thermal load, chemical attack and antistatic floors. 700 °C intermittent, pH 3 to 14, DIN EN 61340-5-1. 

For parking decks, ramps and general industrial floors under vehicle load. 

For design floors in retail, hospitality and residential work. Applied from 1 mm, pigmentable up to 2 percent. 

For grindable mineral terrazzo floors. Applied 6 to 60 mm, grindable after one day. 

For levelling subfloors indoors. Applied 5 to 70 mm, strength class CT-C25-F5. 

For levelling indoors and outdoors. Applied 5 to 70 mm, strength class CT-C40-F7. 

For garages, screeds and halls indoors. Self-levelling, applied 2 to 50 mm, abrasion class A22. 

For tanks, pools and drinking water contact. Waterproof to 1.5 bar at 4 mm, KTW and KSW approved. 

For water-retaining structures. Waterproof to 1.5 bar at 7 days and 5 bar at 28 days, DVGW W270 and W347. 

For substrates that move. Crack-bridging from 1.3 mm to DIN EN 14891, waterproof to 2 bar. 

For mineral wall finishes indoors. Applied up to 30 mm, compressive strength approx. 8 N/mm². 

For walls exposed to moisture penetration. Impregnating topcoat. 

For priming absorbent substrates. Aqueous and silicate-based, dry in 2 hours, overcoat within 6. 

For sealing industrial floors matt. Two-component, 150 to 300 g/m², declared free of VOC and APEO. 

For design and residential floors, not for industrial use. Single-component. 

For impregnating substrates against penetrating moisture.

For protecting finished floors indoors. Sealer. 

For filling cracks and cavities in the substrate before the system is laid. Fast curing. 

For repairing cracks in the substrate before the system is laid.