Certifications, test reports and declarations — all on the proof hub.
Silicate Systems
Contact
← All systems
Repair

Eco Crack Repair

For concrete floor crack repair before the floor system is laid. Fills cracks up to 5 mm deep and wide.


Where it may be used

Indoor and outdoor, as stated on this system's own data sheet. Use elsewhere is not covered by that sheet.

Application temperature: +2 °C.

Thickness range: 1 to 10 mm.

Substrate must be sound and free of loose material, with a pull-off strength of at least 1.5 N/mm². The chemistry is consistent; what the floor becomes depends on the substrate, the specification and the applicator.


Declared for this system
EMICODE EC1PLUS — very low emission

VOC- and APEO-free is declared for Eco Sil, Eco Flex All In One and Eco Shield only, so it is not claimed here. BREEAM, DGNB and LEED contribution is documented per project, not per range.


Data sheet figures
Eco Crack Repair. Figures from the published technical data sheet.
PropertyValueStandard
Strength classCT-C20-F7DIN EN 13813
Compressive strength20 N/mm²—
Flexural strength7.5 N/mm²—
Crack bridgingfills cracks up to 5 mm deep and wide—
Application thickness1 to 10 mm—
Consumptionapprox. 1.8 kg/m² per mm—
Mixing ratio4.75 to 5.0 L water / 25 kg powder—
Processing timeapprox. 25 min at 20 °C—
Processing temperature+2 °C to +35 °C—
Walkableafter 4 hours—
Light load1 day—
Fully loadable4 days—
Packaging25 kg bag—
Storage12 months—
Emission classEMICODE EC1PLUSGEV

Documents

/systems/eco-crack-repair