Certifications, test reports and declarations — all on the proof hub.
Silicate Systems
Contact
← All systems
Waterproofing

Eco Flex All In One

For substrates that move. Crack-bridging from 1.3 mm to DIN EN 14891, waterproof to 2 bar. 


Where it may be used

Indoor and outdoor, as stated on this system's own data sheet. Use elsewhere is not covered by that sheet.

Application temperature: +5 °C.

Thickness range: max. 2 mm.

Substrate must be sound and free of loose material, with a pull-off strength of at least 1.5 N/mm². The chemistry is consistent; what the floor becomes depends on the substrate, the specification and the applicator.


Declared for this system
EMICODE EC1PLUS — very low emissionVOC- and APEO-free (data sheet)

BREEAM, DGNB and LEED contribution is documented per project, not per range.


Data sheet figures
Eco Flex All In One. Figures from the published technical data sheet.
PropertyValueStandard
Waterproof2 barDIN EN 14891
Composition2-component—
Crack bridgingmin. 1.3 mmDIN EN 14891
Consumption3 kg/m² in two coats—
VOC and APEOfreedeclared in data sheet
Processing temperature+5 °C to +35 °C—
Processing timeapprox. 50 minat 20 °C
Walkable6 hours—
Mechanical load1 day—
Total thicknessmax. 2 mm—
Mixing ratio1:1 (A:B)—
Packaging10 kg bucket (5 kg A + 5 kg B)—
Storage12 months—
Storage temperature10–25 °C, not below 0 °C—
Emission classEMICODE EC1PLUSGEV

Documents

/systems/eco-flex-all-in-one