Eco Floor Protect
For protecting finished floors indoors. Sealer.
Where it may be used
Indoor only, as stated on this system's own data sheet. Use elsewhere is not covered by that sheet.
Application temperature: > 5 °C.
Substrate must be sound and free of loose material, with a pull-off strength of at least 1.5 N/mm². The chemistry is consistent; what the floor becomes depends on the substrate, the specification and the applicator.
Declared for this system
VOC- and APEO-free is declared for Eco Sil, Eco Flex All In One and Eco Shield only, so it is not claimed here. BREEAM, DGNB and LEED contribution is documented per project, not per range.
Data sheet figures
| Property | Value | Standard |
|---|---|---|
| Type | Two-component aliphatic PU topcoat, satin finish | — |
| UV resistance | 2000 hours, passed | ASTM G53 (QUV accelerated weathering) |
| Chemical resistance | Resistant to chemicals, water and mechanical abrasion | — |
| Consumption | 150–300 g/m² (min. 150 g/m²) | — |
| Processing temperature | > 5 °C | — |
| Coats | 1–2, depending on finish | — |
| Mixing ratio | 4 kg A : 0.8 kg B | — |
| Packaging | 4.8 kg combined (4 kg A + 0.8 kg B) | — |
| Shelf life, liquid | 6 months | — |
| Storage temperature | 10–25 °C, not below 0 °C | — |
| Colour | Clear, or tinted to NCS or RAL with 5–10% water-based pigment paste | — |
Documents
/systems/eco-floor-protect