Certifications, test reports and declarations — all on the proof hub.
Silicate Systems
Contact
← All systems
Primers and sealers

Eco Hydro Glass

For impregnating substrates against penetrating moisture.


Where it may be used

Indoor and outdoor, as stated on this system's own data sheet. Use elsewhere is not covered by that sheet.

Application temperature: +5 °C.

Substrate must be sound and free of loose material, with a pull-off strength of at least 1.5 N/mm². The chemistry is consistent; what the floor becomes depends on the substrate, the specification and the applicator.


Declared for this system
EMICODE EC1PLUS — very low emissionEPD verified

VOC- and APEO-free is declared for Eco Sil, Eco Flex All In One and Eco Shield only, so it is not claimed here. BREEAM, DGNB and LEED contribution is documented per project, not per range.


Data sheet figures
Eco Hydro Glass. Figures from the published technical data sheet.
PropertyValueStandard
Water tightness< 7.5% water absorption (vs. untreated); < 10% in alkaline solutionEN 1504-2
Chemical resistanceGood resistance to saltwater and chemicals—
CompositionInorganic (silicate)—
pH11.4—
Consumption150–400 g/m² (concrete/screed); 15–30 g/m² (self-levelling compounds)—
Mixing ratio1:1 with water on highly absorbent substrates—
Processing temperature+5 °C to +55 °C—
Drying timemin. 6 hours—
Packaging5 or 30 L canisters—
Storage12 months—
Emission classEMICODE EC1PLUSGEV

Documents

/systems/eco-hydro-glass