Certifications, test reports and declarations — all on the proof hub.
Silicate Systems
Contact
← All systems
Primers and sealers

Eco Protection Varnish

UV-stable two-component water-based topcoat for mineral floors, microcement and parquet. Satin finish, 5,000 h QUV weathering.


Where it may be used

Use is stated on this system's own data sheet; ask us for the current sheet before specifying it outside an interior.

Application temperature: > 5 °C.

Substrate must be sound and free of loose material, with a pull-off strength of at least 1.5 N/mm². The chemistry is consistent; what the floor becomes depends on the substrate, the specification and the applicator.


Declared for this system

VOC- and APEO-free is declared for Eco Sil, Eco Flex All In One and Eco Shield only, so it is not claimed here. BREEAM, DGNB and LEED contribution is documented per project, not per range.


Data sheet figures
Eco Protection Varnish. Figures from the published technical data sheet.
PropertyValueStandard
Type2K, water-based aliphatic polyurethane, satin-finish topcoat—
UV resistance5,000 h QUV weathering, passedASTM G53
Consumption150–300 g/m² (one or two coats, min. 150 g/m²)—
Mixing ratioB : A = 10 : 1 (by pack weight)—
Processing temperature> 5 °C—
pH8–10 (Comp. B); not applicable (Comp. A)—
Pigmentation5–10% by weight, water-based pigment pastes—
Shelf life, liquid6 months minimum—
Storage temperature5–25 °C—
PackagingSmall kit: 0.8 kg Comp. B + 0.08 kg Comp. A; Large kit: 4 kg Comp. B + 0.4 kg Comp. A—

Documents

/systems/eco-protection-varnish