Certifications, test reports and declarations — all on the proof hub.
Silicate Systems
Contact
← All systems
Industrial floors

Eco Rapid Deco

Decorative mineral poured floor for retail, hospitality and homes. An option to consider alongside microcement; applied from 1 mm, pigmentable up to 2%.


Where it may be used

Indoor only, as stated on this system's own data sheet. Use elsewhere is not covered by that sheet.

Application temperature: +2 °C.

Thickness range: 1 to 30 mm.

Substrate must be sound and free of loose material, with a pull-off strength of at least 1.5 N/mm². The chemistry is consistent; what the floor becomes depends on the substrate, the specification and the applicator.


Declared for this system
EMICODE EC1PLUS — very low emissionEPD verified

VOC- and APEO-free is declared for Eco Sil, Eco Flex All In One and Eco Shield only, so it is not claimed here. BREEAM, DGNB and LEED contribution is documented per project, not per range.

Walkable in four hours means light foot traffic at 20 °C. Full operational load is four days indoors and seven days outdoors.


Data sheet figures
Eco Rapid Deco. Figures from the published technical data sheet.
PropertyValueStandard
Strength classCT-C40-F10DIN EN 13813
Compressive strengthapprox. 40 N/mm²DIN EN 13813
Flexural strengthapprox. 10 N/mm²DIN EN 13813
Abrasion resistanceA12Böhme, EN 13813
Application thickness1 to 30 mm—
Consumptionapprox. 1.8 kg/m² per mm layer—
Mixing ratio6.0 L water / 25 kg powder—
Processing temperaturemin. +2 °C, max. +35 °C—
Processing timeapprox. 30 minat 20 °C
Walkableafter 4 hours20 °C
Fully loadable4 days20 °C
Emission classEMICODE EC1PLUSGEV
Packaging25 kg paper bag—
Shelf life, powder12 monthsoriginal packaging
PigmentationMax. 2% pigment; NCS or RAL shade reference, with natural variation—

Projects using this system

Documents

/systems/eco-rapid-deco