Certifications, test reports and declarations — all on the proof hub.
Silicate Systems
Contact
← All systems
Repair

Eco Repair

Fast-curing mortar for concrete floor repair: fills cracks and cavities in the substrate before the floor system is laid.


Where it may be used

Indoor and outdoor, as stated on this system's own data sheet. Use elsewhere is not covered by that sheet.

Application temperature: +2 °C.

Substrate must be sound and free of loose material, with a pull-off strength of at least 1.5 N/mm². The chemistry is consistent; what the floor becomes depends on the substrate, the specification and the applicator.


Declared for this system
EMICODE EC1PLUS — very low emission

VOC- and APEO-free is declared for Eco Sil, Eco Flex All In One and Eco Shield only, so it is not claimed here. BREEAM, DGNB and LEED contribution is documented per project, not per range.


Data sheet figures
Eco Repair. Figures from the published technical data sheet.
PropertyValueStandard
Compressive strength≥ 50 N/mm²28 days
Early strength classClass B, ≥ 25 N/mm² at 1 day—
Flexural strength13 N/mm²28 days
Waterproofup to 1.5 bar—
Loadableafter 30 min—
Grain size0 to 0.5 mm—
Bulk densityapprox. 1.3 kg/dm³—
Mixing ratiomax. 4.5 to 5.5 L water / 25 kg powder—
Processing timeapprox. 10 min at 20 °C—
Processing temperature+2 °C to +35 °C—
Consumptionapprox. 2.0 kg per litre cavity—
Packaging25 kg bag—
Storage12 months—
Emission classEMICODE EC1PLUSGEV

Documents

/systems/eco-repair