Certifications, test reports and declarations — all on the proof hub.
Silicate Systems
Contact
← All systems
Screeds and levelling

Eco Screed

For levelling subfloors indoors. Applied 5 to 70 mm, strength class CT-C25-F5. 


Where it may be used

Indoor only, as stated on this system's own data sheet. Use elsewhere is not covered by that sheet.

Application temperature: +10 °C.

Thickness range: 5 to 70 mm.

Substrate must be sound and free of loose material, with a pull-off strength of at least 1.5 N/mm². The chemistry is consistent; what the floor becomes depends on the substrate, the specification and the applicator.


Declared for this system
EMICODE EC1PLUS — very low emissionEPD verified

VOC- and APEO-free is declared for Eco Sil, Eco Flex All In One and Eco Shield only, so it is not claimed here. BREEAM, DGNB and LEED contribution is documented per project, not per range.


Data sheet figures
Eco Screed. Figures from the published technical data sheet.
PropertyValueStandard
Strength classCT-C25-F5DIN EN 13813
Compressive strength≥ 25 N/mm²EN 13813
Flexural strength≥ 5 N/mm²EN 13813
Application thickness5 to 70 mm—
Consumptionapprox. 1.7 kg/m² per mm—
Mixing ratio4.25–4.5 L water / 25 kg powder—
Processing temperaturemin. +10 °C, max. +35 °C—
Processing timeapprox. 35 min at 20 °C—
Walkableafter 4 hours—
Light loadafter 1 day—
Fully loadableafter 4 days—
Packaging25 kg bag, or big bags from ~24 t—
Storage9 months—
Emission classEMICODE EC1PLUSGEV

Documents

/systems/eco-screed