Certifications, test reports and declarations — all on the proof hub.
Silicate Systems
Contact
← All systems
Waterproofing

Eco Sil

For tanks, pools and drinking water contact. Waterproof to 1.5 bar at 4 mm, KTW and KSW approved. 


Where it may be used

Indoor and outdoor, as stated on this system's own data sheet. Use elsewhere is not covered by that sheet.

Application temperature: +10 °C.

Thickness range: 2 mm per layer, max. 4 mm total (up to 6 mm).

Substrate must be sound and free of loose material, with a pull-off strength of at least 1.5 N/mm². The chemistry is consistent; what the floor becomes depends on the substrate, the specification and the applicator.


Declared for this system
EMICODE EC1PLUS — very low emissionVOC- and APEO-free (data sheet)

BREEAM, DGNB and LEED contribution is documented per project, not per range.


Data sheet figures
Eco Sil. Figures from the published technical data sheet.
PropertyValueStandard
Waterproof1.5 bar at 4 mmtwo layers of 2 mm each
Chemical resistancepH 0–14—
Compressive strengthmin. 35 N/mm²—
Flexural strengthapprox. 4.5 N/mm²—
Drinking water approvalKTW—
Pool approvalKSW—
Chemical resistance certificationBGR 132—
Sulfate resistanceyesDIN 4030
Application thickness2 mm per layer, max. 4 mm total (up to 6 mm)—
Consumptionapprox. 2 kg/m² per mm—
Processing timeapprox. 35 minat 20 °C
Walkableafter 1 day—
Fully loadableafter 3 days—
VOC and APEOfreedeclared in data sheet
Packaging3 × 5 kg bags in a bucket—
Storage9 months10–25 °C, not below 0 °C
Emission classEMICODE EC1PLUSGEV

Projects using this system

Documents

/systems/eco-sil