Eco Topcoat Mono
For design and residential floors, not for industrial use. Single-component.
Where it may be used
Indoor only, as stated on this system's own data sheet. Use elsewhere is not covered by that sheet.
Substrate must be sound and free of loose material, with a pull-off strength of at least 1.5 N/mm². The chemistry is consistent; what the floor becomes depends on the substrate, the specification and the applicator.
Declared for this system
EMICODE EC2 — very low emissionEPD verified
VOC- and APEO-free is declared for Eco Sil, Eco Topcoat Mat and Eco Flex All In One only, so it is not claimed here. BREEAM, DGNB and LEED contribution is documented per project, not per range.
Data sheet figures
| Property | Value | Standard |
|---|---|---|
| Emission class | EMICODE EC2 | GEV |
Documents
/systems/eco-topcoat-mono