Eco Wall
For mineral wall finishes indoors. Applied up to 30 mm, compressive strength approx. 8 N/mm².
Where it may be used
Indoor and outdoor, as stated on this system's own data sheet. Use elsewhere is not covered by that sheet.
Application temperature: +5 °C.
Thickness range: up to 30 mm.
Substrate must be sound and free of loose material, with a pull-off strength of at least 1.5 N/mm². The chemistry is consistent; what the floor becomes depends on the substrate, the specification and the applicator.
Declared for this system
EMICODE EC1PLUS — very low emission
VOC- and APEO-free is declared for Eco Sil, Eco Flex All In One and Eco Shield only, so it is not claimed here. BREEAM, DGNB and LEED contribution is documented per project, not per range.
Data sheet figures
| Property | Value | Standard |
|---|---|---|
| Compressive strength | approx. 8 N/mm² | — |
| Flexural strength | approx. 3 N/mm² | — |
| Application thickness | up to 30 mm | — |
| Consumption | approx. 1.0 kg/m² per mm | — |
| Mixing ratio | 7.25–7.5 L water / 25 kg powder | — |
| Processing temperature | min. +5 °C, max. +35 °C | — |
| Processing time | approx. 30 min | — |
| Bulk density | approx. 1.1 kg/dm³ | — |
| Light load | 1 day | — |
| Fully loadable | 4 days | — |
| Packaging | 25 kg paper bag | — |
| Storage | 12 months | — |
| Emission class | EMICODE EC1PLUS | GEV |
Projects using this system
Documents
/systems/eco-wall


