Eco Hydro Sil
For walls exposed to moisture penetration. Impregnating topcoat.
Where it may be used
Indoor and outdoor, as stated on this system's own data sheet. Use elsewhere is not covered by that sheet.
Application temperature: min. 5 °C.
Substrate must be sound and free of loose material, with a pull-off strength of at least 1.5 N/mm². The chemistry is consistent; what the floor becomes depends on the substrate, the specification and the applicator.
Declared for this system
EMICODE EC1PLUS — very low emissionEPD verified
VOC- and APEO-free is declared for Eco Sil, Eco Flex All In One and Eco Shield only, so it is not claimed here. BREEAM, DGNB and LEED contribution is documented per project, not per range.
Data sheet figures
| Property | Value | Standard |
|---|---|---|
| Emission class | EMICODE EC1PLUS | GEV |
| Reaction to fire | A1 | EN 1504-2 |
| Penetration depth | Class I, < 10 mm | EN 1504-2 |
| Chemical resistance | No visible defects | EN 1504-2 |
| Drying time | Class II, > 10 mm | EN 1504-2 |
| pH | 11.4 | — |
| Composition | Inorganic silicate | — |
| Processing temperature | min. 5 °C, max. 55 °C | — |
| Consumption | 400–800 g/m² (concrete/screed) | — |
| Packaging | 5 or 30 L canisters | — |
| Storage | 12 months | — |
Projects using this system
Documents
/systems/eco-hydro-sil
