Certifications, test reports and declarations — all on the proof hub.
Silicate Systems
Contact
← All systems
Primers and sealers

Eco Primer

For priming absorbent substrates. Aqueous and silicate-based, dry in 2 hours, overcoat within 6 hours. 


Where it may be used

Indoor and outdoor, as stated on this system's own data sheet. Use elsewhere is not covered by that sheet.

Substrate must be sound and free of loose material, with a pull-off strength of at least 1.5 N/mm². The chemistry is consistent; what the floor becomes depends on the substrate, the specification and the applicator.


Declared for this system
EMICODE EC1PLUS — very low emissionEPD verified

VOC- and APEO-free is declared for Eco Sil, Eco Flex All In One and Eco Shield only, so it is not claimed here. BREEAM, DGNB and LEED contribution is documented per project, not per range.


Data sheet figures
Eco Primer. Figures from the published technical data sheet.
PropertyValueStandard
Typeaqueous dispersion, solvent-free—
pH8 to 9—
Consumption0.15 to 0.20 kg/m² (concrete/screed); 0.10 to 0.15 kg/m² (self-levelling compounds)—
Drying timeapprox. 2 hours (20 °C/50% RH)—
Overcoat within6 hours—
Emission classEMICODE EC1PLUSGEV
VOC and APEOsolvent-free, no organic solvents—
Packaging5 or 30 L canisters—
Storage6 months, store above 0 °C in original packaging—

Projects using this system

Documents

/systems/eco-primer