Eco Rapid Indu
For warehouses, garages and heavy-duty traffic. Walkable in four hours, fully loadable in four days.
Where it may be used
Use is stated on this system's own data sheet; ask us for the current sheet before specifying it outside an interior.
Application temperature: +2 °C.
Thickness range: 2 to 40 mm.
Substrate must be sound and free of loose material, with a pull-off strength of at least 1.5 N/mm². The chemistry is consistent; what the floor becomes depends on the substrate, the specification and the applicator.
Declared for this system
VOC- and APEO-free is declared for Eco Sil, Eco Topcoat Mat and Eco Flex All In One only, so it is not claimed here. BREEAM, DGNB and LEED contribution is documented per project, not per range.
Walkable in four hours means light foot traffic at 20 °C. Full, operational load is four days indoors and seven days outdoors.
Data sheet figures
| Property | Value | Standard |
|---|---|---|
| Strength class | CT-C40-F10 | DIN EN 13813 |
| Compressive strength | approx. 40 N/mm² | DIN EN 13813 |
| Flexural strength | approx. 10 N/mm² | DIN EN 13813 |
| Abrasion resistance | A12 | Böhme |
| Slip resistance | R 10, R 12 with quartz sand | — |
| Emission class | EMICODE EC1PLUS | GEV |
| Application thickness | 2 to 40 mm | 3 to 5 mm recommended for large areas |
| Consumption | approx. 1.8 kg/m² per mm | — |
| Mixing ratio | 4.75 L water per 25 kg | 25 kg paper bag |
| Processing time | approx. 35 min at 20 °C | aerate up to 5 min before pouring |
| Processing temperature | min. +2 °C, max. +35 °C | substrate pull-off min. 1.5 N/mm² |
| Walkable | 4 hours | protect 24 h from sun, draft, frost and rain |
| Light load | 1 day | — |
| Fully loadable | 4 days | 7 days exterior |
| Bulk density | approx. 1.2 kg/dm³ | fresh mortar approx. 2.0 kg/dm³ |
| Storage | 12 months | original packaging, 10 to 25 °C, not below 0 °C |
Projects using this system
Documents
/systems/eco-rapid-indu