For those drawn to microcement’s seamless mineral aesthetic, Eco Rapid Deco offers that look in a self-levelling mineral poured floor with a silicate binder. Its published application range of 1 to 30 mm and compressive strength of approximately 40 N/mm² combine decorative freedom with documented mechanical performance. A verified dry-mortar EPD (MD-26094-EN) and product-specific EMICODE EC1PLUS licensing support specification. Eco Floor Protect can provide the protective indoor finish. Microcement is typically a thin, hand-trowelled cement-based finish; its formulation, thickness and performance depend on the selected system.
Eco Rapid Deco is a self-levelling mineral poured floor, applied from 1 to 30 mm. It brings the seamless mineral aesthetic into a poured floor layer rather than a thin decorative coating.
Microcement is typically a thin, hand-trowelled cement-based finish built up in several coats. Thickness and reinforcement requirements depend on the manufacturer.
Published strength class CT-C40-F10: approximately 40 N/mm² compressive strength and 10 N/mm² flexural strength under DIN EN 13813. Decorative appearance is backed by measured performance.
Strength, adhesion and wear performance depend on the named microcement system and its complete build-up. Compare published results under equivalent test methods.
Self-levelling application with a silicate binder. Eco Floor Protect is a protective indoor topcoat option; preparation, primer and protection are specified for the substrate and use.
Hand-trowelled application, usually with successive coats, sanding and sealing. Drying times and the protective finish depend on the selected system.
Eco Rapid Deco is covered by independently verified dry-mortar EPD MD-26094-EN and licensed EMICODE EC1PLUS. Evidence is product-specific; topcoats require their own documentation.
EPDs and emission certificates depend on the selected manufacturer and product. Request the documentation for the complete specified system.